• Bridgeport Regional Aquaculture Science and Technology Education Center Tour - Buck Scientific

    Join us on a tour of Bridgeport Regional Aquaculture Science and Technology Education Center (BRASTEC) located in Bridgeport, CT, with Kylie Fawcett. The BRASTEC programs enhance the traditional academic high school curriculum with a specialized emphasis on science and technology related to the development of aquaculture in the State of Connecticut. Buck Scientific, located in Norwalk CT, has been a loyal supporter of the Bridgeport Aquaculture School for over 20 years by supplying and maintaining the scientific instruments needed for students' learning and success. ------------------------------------------ About Kylie Fawcett: Kylie Fawcett is a student at BRASTEC. Her passion for scientific research was launched during her sophomore year when she took Introduction to Analytical Inst...

    published: 10 Nov 2015
  • Tramming a milling machine - square a spindle on J head bridgeport mill - Pro Tram - Edge Technology

    Pro Tram System by Edge Technology http://www.edgetechnologyproducts.com The Pro Tram is a machinist tool that allows you to easily square the spindle of your milling machine. With this gage the process of tramming is greatly simplified and can be completed in a fraction of the time compared to conventional tramming techniques. We guarantee that the Pro Tram will take the hassle out of tramming a milling machine. The Pro Tram system eliminates the need swing your indicator back and forth 180 degrees during tramming procedure. Just adjust the head until both gages read the same number and you can be certain that your spindle is perfectly square. Designed for use with Bridgeport style milling machines and CNC mills. • Large 2.2" easy to read indicator face. • Gage repeatability 0.0002" • La...

    published: 14 Nov 2010
  • LIFT Technologies- Bridgeport 3D

    LIFT Technologies UAV flight.

    published: 18 May 2016
  • Bridgeport Spindle Repair - High Speed Technologies

    Contact us today for your Bridgeport spindle repair!

    published: 08 Oct 2015
  • Wheelabrator Bridgeport: 25 Years of Renewable Energy in Bridgeport, Conn.

    Wheelabrator Bridgeport marked 25 years of safe, reliable and environmentally responsible operations at an anniversary celebration in June where current and former employees, customers, and state and local officials saluted the waste-to-energy facility's role in generating reliable, renewable power for Connecticut residents and municipalities. Wheelabrator Bridgeport serves the City of Bridgeport and two dozen additional municipalities in Fairfield, Litchfield and New Haven counties through its two principal customers, the Connecticut Resources Recovery Authority (CRRA) and the Housatonic Resources Recovery Authority. Every day, the plant converts over 2,200 tons of municipal solid waste to energy, generating over 67,000 kilowatts of electricity -- enough to power over 64,000 Connecticut ...

    published: 25 Sep 2013
  • How to: DIY Bridgeport Power Draw Bar! Widget85

    Using Linear Bearings to make an inexpensive Power Draw Bar for Bridgeport milling machine using an impact wrench! DIY Kit: http://bit.ly/1WF5UCs (includes machined parts, springs, bearings, etc. Everything except wrench and socket) Fusion 360 CAD Model: http://bit.ly/1Rksc8P Fusion 360 CAD Video Tutorial: http://bit.ly/1UcAjdt Links / Bill of Material: Wrench: http://amzn.to/1RhAmyU or http://ebay.to/1XJyliE Socket: http://amzn.to/1Vz5y1G or http://ebay.to/25idpFg 12MM Rail: http://amzn.to/1Rdwhiv or http://ebay.to/1T5eZp4 12MM Bearing: http://ebay.to/1MkmKG9 or http://amzn.to/22twSE6 M4x40: http://amzn.to/1U4TENy Springs: McMaster 9657K434 and 9657K126 Spacer: McMaster 92825A341 Transfer Punches: http://amzn.to/21F4cSS DeWalt Saw: http://amzn.to/22BSmLB Other Good Power Draw Bar Vi...

    published: 23 Mar 2016
  • Adam Savage's New Milling Machine!

    Watch an extended clip showing Adam's custom mill upgrades here: http://www.tested.com/premium/565831-adam-savages-bridgeport-mill-upgrades/ Adam is super excited for a new tool just installed in the cave: a Bridgeport mill! We stop by the shop to get a tour of the new machine and learn how Adam plans on using it for future projects and One Day Builds. Shot and edited by Joey Fameli Subscribe for more videos! http://www.youtube.com/subscription_center?add_user=testedcom Follow us on Twitter: http://www.twitter.com/testedcom Get updates on Facebook: http://www.facebook.com/testedcom Tested is: Adam Savage http://www.twitter.com/donttrythis Norman Chan http://www.twitter.com/nchan Joey Fameli http://www.twitter.com/joeyfameli Adam Isaak http://www.instagram.com/adamisaak Kishore Hari h...

    published: 24 Mar 2016
  • RAS Technology (German Aquaculture Farm)

    German aquaculture technology by UFTAE.

    published: 09 May 2016
  • Tool Setter -Edge Technology

    I thought I had a great idea here.......but as I was finishing the video editing, it dawned on my that I didn't need to do it with the blocks. Epiphany at the end. lol

    published: 09 Mar 2016
  • Pro Tram Edge Technology - How to tram the head of your mill

    A short instruction on how to use the Pro Tram tool from Edge Technology. Very easy and fast way to make sure you have the milling head adjusted correctly, perpendicular to your milling table. I know I don't have a proper mill and only a milling attachment for my lathe but that's a mouth full. The lathe and milling attachment shown in the video is sold and I have a different one now.

    published: 06 Jun 2015
  • wheelabrator tour

    This video is about wheelabrator tour

    published: 09 Dec 2014
  • Water District's 560-acres near Lake Bridgeport draws questions

    Tucked away in a remote part of rural Jack County is 560-acre piece of land owned by Tarrant Regional Water District. The agency's board members allow district workers to hunt I'm the land for free. For years the land was a nicely kept secret, but it's existence became a big issue in the May board election. (July 23, 2013) Video and editing by Gordon Dickson

    published: 23 Jul 2013
  • Latest Dental Technologies at DeJesus Dental Group in Bridgeport, CT

    Dr. DeJesus talks about the latest technologies they use on their practice and it helps them give the best dental care for their patients. ----- Know more about the Latest Dental Technologies of DeJesus Dental Group, Visit https://dejesusdental.com/about-us/ or Call 203-916-9348 for Bridgeport/Trumbull Line or 203-212-8259 for Stratford to Request your appointment You can also like us on Facebook at https://www.facebook.com/DeJesusDentalGroup/?fref=ts Google+ at http://dejesusdental.com/#gplus-popup

    published: 23 Jun 2016
  • Nanotechnology Super Capacitors, University of Bridgeport, School of Engineering

    Nanotechnology Super Capacitors, Biomedical Engineering, University of Bridgeport, School of Engineering

    published: 08 Jan 2015
  • LIFT Technologies- Janesville Dollar General

    LIFT Technologies UAV flight.

    published: 18 May 2016
  • How To: Fusion 360 Bridgeport Power Drawbar! Fusion Friday #20

    Using Fusion 360 CAD to design components and an assembly with motion and joints to model a Bridgeport Power Drawbar! Emphasis on good CAD modeling, including using the Project tool! See this part made! http://bit.ly/1pyo65S Download Free Fusion360 trial at http://bit.ly/24j2nfM ! Fusion 360 CAD Model: http://bit.ly/1Rksc8P We publish weekly CNC machining videos (Wednesday Widget) and weekly Fusion 360 Tutorial (Fusion Friday!) If you enjoy this NYC CNC video please hit the like button and share with a friend, it really goes a long way! Recent Videos: Form, Cut or Mill Threads: http://bit.ly/1nHBnrx Fusion 360 1-2-3 Block: http://bit.ly/21qgq1y Subscribe For More: http://bit.ly/22CjJoK Follow on Twitter: http://bit.ly/1RdwzGe Facebook: http://bit.ly/1UhX4gu Instagram: http://bit.l...

    published: 25 Mar 2016
Bridgeport Regional Aquaculture Science and Technology Education Center Tour - Buck Scientific

Bridgeport Regional Aquaculture Science and Technology Education Center Tour - Buck Scientific

  • Order:
  • Duration: 3:50
  • Updated: 10 Nov 2015
  • views: 1217
videos
Join us on a tour of Bridgeport Regional Aquaculture Science and Technology Education Center (BRASTEC) located in Bridgeport, CT, with Kylie Fawcett. The BRASTEC programs enhance the traditional academic high school curriculum with a specialized emphasis on science and technology related to the development of aquaculture in the State of Connecticut. Buck Scientific, located in Norwalk CT, has been a loyal supporter of the Bridgeport Aquaculture School for over 20 years by supplying and maintaining the scientific instruments needed for students' learning and success. ------------------------------------------ About Kylie Fawcett: Kylie Fawcett is a student at BRASTEC. Her passion for scientific research was launched during her sophomore year when she took Introduction to Analytical Instruments. . The class incorporated instruction on over 10 different instruments, including the Buck GC, HPLC, Cecil and IR, and taught lab reporting and writing techniques for research. Kylie thrived in the class and embraced the challenges in perfecting equipment techniques and processes. With her knowledge of the analytical instruments, Kylie is using the freeze dryer and IR to lyophilize and compare samples of collagen. She hopes to develop new techniques in the creation of surgical sutures. Kylie has competed in state and national science competitions, taking first place in CT and recently ranking in the top twenty students nationwide at the national convention in Kentucky. She is also a gifted artist, Varsity athlete and President of the schools chapter of the FFA. Kylie will attend college in the fall of 2016 and hopes to study biomedical research. ------------------------------------------------------ About Buck Scientific: Buck Scientific, Inc. has more than 10,000 satisfied instrument users in over 40 countries. We support a wide variety of customers in the industrial, environmental, quality control, mining, plating and educational markets. Our engineers and chemists are continuously developing new applications to serve particular needs. Please call us toll free 1-800-562-5566 to find out how we can provide help for your specific requirements. Contact sales@bucksci.com for any questions. Website: http://www.bucksci.com Facebook: http://www.facebook.com/bucksci Email: sales@bucksci.com ------------------------------------------------------------- Song Credit: Santo Rico by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org/
https://wn.com/Bridgeport_Regional_Aquaculture_Science_And_Technology_Education_Center_Tour_Buck_Scientific
Tramming a milling machine - square a spindle on J head bridgeport mill - Pro Tram - Edge Technology

Tramming a milling machine - square a spindle on J head bridgeport mill - Pro Tram - Edge Technology

  • Order:
  • Duration: 1:52
  • Updated: 14 Nov 2010
  • views: 111349
videos
Pro Tram System by Edge Technology http://www.edgetechnologyproducts.com The Pro Tram is a machinist tool that allows you to easily square the spindle of your milling machine. With this gage the process of tramming is greatly simplified and can be completed in a fraction of the time compared to conventional tramming techniques. We guarantee that the Pro Tram will take the hassle out of tramming a milling machine. The Pro Tram system eliminates the need swing your indicator back and forth 180 degrees during tramming procedure. Just adjust the head until both gages read the same number and you can be certain that your spindle is perfectly square. Designed for use with Bridgeport style milling machines and CNC mills. • Large 2.2" easy to read indicator face. • Gage repeatability 0.0002" • Large 5" distance between indicators to ensure that the mill head is as square to the table as possible. • Calibration gage block included. • Large 1/2" shank. • Durable padded case included. Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram by Edge Technology solves all of these problems allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. It's that easy. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vise allowing you to tram the head to the vise instead of the table. The Pro Tram is a must have if you need to rotate the head to a precision angle. Calibration of the Pro Tram is easy, just place the included calibration magnet anywhere on the table and lower the first indicator down onto it. Set that indicator to zero and with the quill locked rotate the unit and repeat the process by setting the second indicator on the calibration magnet and setting it to zero as well. Since this calibration process accounts for any inaccuracy with the collet or spindle it makes the Pro Tram the most accurate tramming gage available. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology. Check out our ever expanding product line at edgetechnologyproducts.com. Edge Technology. Driving your shops performance to the edge. "tramming milling machine" "tramming mill" cnc "bridgeport mill" "spindle square" Tramming a milling machine - square a spindle on J head bridgeport mill - Pro Tram - Edge Technology Lathe Vise Machinist haas vmc aluminum vise kurt squaring vertical knee head set up indicator endmill tormach machinist dial test horizontal tools high speed machining jet sale squares tool metal grizzly starrett level operation manufacturers supermax manual table bench acra axis align alignment
https://wn.com/Tramming_A_Milling_Machine_Square_A_Spindle_On_J_Head_Bridgeport_Mill_Pro_Tram_Edge_Technology
LIFT Technologies- Bridgeport 3D

LIFT Technologies- Bridgeport 3D

  • Order:
  • Duration: 2:36
  • Updated: 18 May 2016
  • views: 144
videos
LIFT Technologies UAV flight.
https://wn.com/Lift_Technologies_Bridgeport_3D
Bridgeport Spindle Repair - High Speed Technologies

Bridgeport Spindle Repair - High Speed Technologies

  • Order:
  • Duration: 0:49
  • Updated: 08 Oct 2015
  • views: 128
videos
Contact us today for your Bridgeport spindle repair!
https://wn.com/Bridgeport_Spindle_Repair_High_Speed_Technologies
Wheelabrator Bridgeport: 25 Years of Renewable Energy in Bridgeport, Conn.

Wheelabrator Bridgeport: 25 Years of Renewable Energy in Bridgeport, Conn.

  • Order:
  • Duration: 4:01
  • Updated: 25 Sep 2013
  • views: 1172
videos
Wheelabrator Bridgeport marked 25 years of safe, reliable and environmentally responsible operations at an anniversary celebration in June where current and former employees, customers, and state and local officials saluted the waste-to-energy facility's role in generating reliable, renewable power for Connecticut residents and municipalities. Wheelabrator Bridgeport serves the City of Bridgeport and two dozen additional municipalities in Fairfield, Litchfield and New Haven counties through its two principal customers, the Connecticut Resources Recovery Authority (CRRA) and the Housatonic Resources Recovery Authority. Every day, the plant converts over 2,200 tons of municipal solid waste to energy, generating over 67,000 kilowatts of electricity -- enough to power over 64,000 Connecticut homes as well as its own operations. The facility directly employs 70 Connecticut residents, many of whom live in Bridgeport, and last year created approximately $32 million of economic activity in the region through direct and indirect jobs, purchases of goods and services, and city and state tax payments. To learn more about Wheelabrator, visit http://www.wheelabratortechnologies.com/.
https://wn.com/Wheelabrator_Bridgeport_25_Years_Of_Renewable_Energy_In_Bridgeport,_Conn.
How to: DIY Bridgeport Power Draw Bar! Widget85

How to: DIY Bridgeport Power Draw Bar! Widget85

  • Order:
  • Duration: 17:42
  • Updated: 23 Mar 2016
  • views: 37651
videos
Using Linear Bearings to make an inexpensive Power Draw Bar for Bridgeport milling machine using an impact wrench! DIY Kit: http://bit.ly/1WF5UCs (includes machined parts, springs, bearings, etc. Everything except wrench and socket) Fusion 360 CAD Model: http://bit.ly/1Rksc8P Fusion 360 CAD Video Tutorial: http://bit.ly/1UcAjdt Links / Bill of Material: Wrench: http://amzn.to/1RhAmyU or http://ebay.to/1XJyliE Socket: http://amzn.to/1Vz5y1G or http://ebay.to/25idpFg 12MM Rail: http://amzn.to/1Rdwhiv or http://ebay.to/1T5eZp4 12MM Bearing: http://ebay.to/1MkmKG9 or http://amzn.to/22twSE6 M4x40: http://amzn.to/1U4TENy Springs: McMaster 9657K434 and 9657K126 Spacer: McMaster 92825A341 Transfer Punches: http://amzn.to/21F4cSS DeWalt Saw: http://amzn.to/22BSmLB Other Good Power Draw Bar Videos: Ray's Garage http://bit.ly/1UC1gqO Tom's Techniques http://bit.ly/1Rx9Zub CompEdgeX: http://bit.ly/1PoXWaD Come Meet NYC CNC & Other YouTuber's in Southern California: TBD NYC CNC Publishes weekly content on CNC, CAD, CAM & Manufacturing including the Wednesday Widget CNC project and Fusion Friday Fusion 360 tutorial! If you enjoy this NYC CNC video please hit the like button and share with a friend, it really goes a long way! Recent Videos: Form, Cut or Mill Threads: http://bit.ly/1nHBnrx Fusion 360 1-2-3 Block: http://bit.ly/21qgq1y Subscribe For More: http://bit.ly/22CjJoK Follow on Twitter: http://bit.ly/1RdwzGe Facebook: http://bit.ly/1UhX4gu Instagram: http://bit.ly/1MzIpVR Patreon: http://bit.ly/NYCpatreon Music copyrighted by John Saunders
https://wn.com/How_To_Diy_Bridgeport_Power_Draw_Bar_Widget85
Adam Savage's New Milling Machine!

Adam Savage's New Milling Machine!

  • Order:
  • Duration: 4:02
  • Updated: 24 Mar 2016
  • views: 444775
videos
Watch an extended clip showing Adam's custom mill upgrades here: http://www.tested.com/premium/565831-adam-savages-bridgeport-mill-upgrades/ Adam is super excited for a new tool just installed in the cave: a Bridgeport mill! We stop by the shop to get a tour of the new machine and learn how Adam plans on using it for future projects and One Day Builds. Shot and edited by Joey Fameli Subscribe for more videos! http://www.youtube.com/subscription_center?add_user=testedcom Follow us on Twitter: http://www.twitter.com/testedcom Get updates on Facebook: http://www.facebook.com/testedcom Tested is: Adam Savage http://www.twitter.com/donttrythis Norman Chan http://www.twitter.com/nchan Joey Fameli http://www.twitter.com/joeyfameli Adam Isaak http://www.instagram.com/adamisaak Kishore Hari http://www.twitter.com/sciencequiche Patrick Norton http://www.twitter.com/patricknorton Frank Ippolito http://www.twitter.com/frankippolito Sean Charlesworth http://www.twitter.com/cworthdynamics Jeremy Williams http://www.twitter.com/jerware Thanks for watching!
https://wn.com/Adam_Savage's_New_Milling_Machine
RAS Technology (German Aquaculture Farm)

RAS Technology (German Aquaculture Farm)

  • Order:
  • Duration: 2:57
  • Updated: 09 May 2016
  • views: 12581
videos
German aquaculture technology by UFTAE.
https://wn.com/Ras_Technology_(German_Aquaculture_Farm)
Tool Setter -Edge Technology

Tool Setter -Edge Technology

  • Order:
  • Duration: 1:39
  • Updated: 09 Mar 2016
  • views: 1850
videos
I thought I had a great idea here.......but as I was finishing the video editing, it dawned on my that I didn't need to do it with the blocks. Epiphany at the end. lol
https://wn.com/Tool_Setter_Edge_Technology
Pro Tram Edge Technology - How to tram the head of your mill

Pro Tram Edge Technology - How to tram the head of your mill

  • Order:
  • Duration: 6:44
  • Updated: 06 Jun 2015
  • views: 2142
videos
A short instruction on how to use the Pro Tram tool from Edge Technology. Very easy and fast way to make sure you have the milling head adjusted correctly, perpendicular to your milling table. I know I don't have a proper mill and only a milling attachment for my lathe but that's a mouth full. The lathe and milling attachment shown in the video is sold and I have a different one now.
https://wn.com/Pro_Tram_Edge_Technology_How_To_Tram_The_Head_Of_Your_Mill
wheelabrator tour

wheelabrator tour

  • Order:
  • Duration: 5:12
  • Updated: 09 Dec 2014
  • views: 1234
videos
This video is about wheelabrator tour
https://wn.com/Wheelabrator_Tour
Water District's 560-acres near Lake Bridgeport draws questions

Water District's 560-acres near Lake Bridgeport draws questions

  • Order:
  • Duration: 1:02
  • Updated: 23 Jul 2013
  • views: 636
videos
Tucked away in a remote part of rural Jack County is 560-acre piece of land owned by Tarrant Regional Water District. The agency's board members allow district workers to hunt I'm the land for free. For years the land was a nicely kept secret, but it's existence became a big issue in the May board election. (July 23, 2013) Video and editing by Gordon Dickson
https://wn.com/Water_District's_560_Acres_Near_Lake_Bridgeport_Draws_Questions
Latest Dental Technologies at DeJesus Dental Group in Bridgeport, CT

Latest Dental Technologies at DeJesus Dental Group in Bridgeport, CT

  • Order:
  • Duration: 2:13
  • Updated: 23 Jun 2016
  • views: 8
videos
Dr. DeJesus talks about the latest technologies they use on their practice and it helps them give the best dental care for their patients. ----- Know more about the Latest Dental Technologies of DeJesus Dental Group, Visit https://dejesusdental.com/about-us/ or Call 203-916-9348 for Bridgeport/Trumbull Line or 203-212-8259 for Stratford to Request your appointment You can also like us on Facebook at https://www.facebook.com/DeJesusDentalGroup/?fref=ts Google+ at http://dejesusdental.com/#gplus-popup
https://wn.com/Latest_Dental_Technologies_At_Dejesus_Dental_Group_In_Bridgeport,_Ct
Nanotechnology Super Capacitors, University of Bridgeport, School of Engineering

Nanotechnology Super Capacitors, University of Bridgeport, School of Engineering

  • Order:
  • Duration: 3:50
  • Updated: 08 Jan 2015
  • views: 702
videos https://wn.com/Nanotechnology_Super_Capacitors,_University_Of_Bridgeport,_School_Of_Engineering
LIFT Technologies- Janesville Dollar General

LIFT Technologies- Janesville Dollar General

  • Order:
  • Duration: 1:42
  • Updated: 18 May 2016
  • views: 124
videos
LIFT Technologies UAV flight.
https://wn.com/Lift_Technologies_Janesville_Dollar_General
How To: Fusion 360 Bridgeport Power Drawbar! Fusion Friday #20

How To: Fusion 360 Bridgeport Power Drawbar! Fusion Friday #20

  • Order:
  • Duration: 16:00
  • Updated: 25 Mar 2016
  • views: 8483
videos
Using Fusion 360 CAD to design components and an assembly with motion and joints to model a Bridgeport Power Drawbar! Emphasis on good CAD modeling, including using the Project tool! See this part made! http://bit.ly/1pyo65S Download Free Fusion360 trial at http://bit.ly/24j2nfM ! Fusion 360 CAD Model: http://bit.ly/1Rksc8P We publish weekly CNC machining videos (Wednesday Widget) and weekly Fusion 360 Tutorial (Fusion Friday!) If you enjoy this NYC CNC video please hit the like button and share with a friend, it really goes a long way! Recent Videos: Form, Cut or Mill Threads: http://bit.ly/1nHBnrx Fusion 360 1-2-3 Block: http://bit.ly/21qgq1y Subscribe For More: http://bit.ly/22CjJoK Follow on Twitter: http://bit.ly/1RdwzGe Facebook: http://bit.ly/1UhX4gu Instagram: http://bit.ly/1MzIpVR Patreon: http://bit.ly/NYCpatreon Music copyrighted by John Saunders
https://wn.com/How_To_Fusion_360_Bridgeport_Power_Drawbar_Fusion_Friday_20
×